|
- Adjustable
- Decrease air leakage
- Prevent dust and vermin intrusion
- RoHS compliance
- Conforms to ASTM D610-01 and ASTM B117 (500 hours salt spray
test)
- High grade cold rolled steel 0.9 mm thickness.
- Powder coat finish preceded by 5 stage iron
phosphate pretreatment.
- Standard color is low gloss black.
|
| Part Number |
Part Name |
| BPLPNABLK |
Base Plate Panel Black |
|
|
| Item |
Description |
Qty |
| 1 |
Base Plate Panel Black |
1 |
| 2 |
T-30 M6x12 screw |
5 |
| 3 |
Cage Nut M6 |
5 |
- Install five cage nut to the square hole around cutout on Base
Plate at desired location.
- Put Base Plate Panel at the big cutout on Base Plate.
- Keep two middle slot at the front side.
- Rotate Base Plate Panel clockwise to create angle with cutout
about 30-45 degree
- Drop Base Plate Panel until bottom side touch top side of Base
Plate.
- Rotate Base Plate Panel counter clockwise until edge of Base
Plate Panel parallel with edge of cutout. At this position the
lower flange of
Base Plate panel shall be keep touching with Base
Plate and prevent removal.
- Set the Base Plate Panel at desired location.
- Fix Base Plate Panel to Base Plate with four M6x12 screw on
both side and one screw on front side.
- Tighten with torque 15-20 inch lbs.
Note : Torque 15-20 in lbs |
| |
HOME 
